NILE CHEMICALS

TETRA BUTYL AMMONIUM IODIDE


1. Product Identification

Synonyms: None
CAS No.: 311-28-4
Molecular Weight: 369.38
Chemical Formula: (C4H9)4NI


2. Composition/Information on Ingredients

 
  Ingredient                                CAS No         Percent        Hazardous                                  
  ---------------------------------------   ------------   ------------   ---------   
  Tetrabutylammonium Iodide                 311-28-4         90 - 100%       Yes                                                                      

3. Hazards Identification

-----------------------------------------------------------------------------------------------------------
Health Rating: 1 - Slight
Flammability Rating: 1 - Slight
Reactivity Rating: 1 - Slight
Contact Rating: 1 - Slight
Lab Protective Equip: GOGGLES; LAB COAT; PROPER GLOVES
Storage Color Code: Green (General Storage)
-----------------------------------------------------------------------------------------------------------
Potential Health Effects
----------------------------------
Inhalation: Irritation of upper respiratory tract.
Ingestion: None identified.
Skin Contact: None identified.
Eye Contact: Irritation.
Chronic Exposure: No information found.
Aggravation of Pre-existing Conditions: No information found.


4. First Aid Measures

Inhalation:If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Prompt action is essential.
Ingestion:Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact:In case of contact, flush skin with water.
Eye Contact:In case of eye contact, immediately flush with plenty of water for at least 15 minutes.


5. Fire Fighting Measures

Fire:Not expected to be a fire hazard.
Explosion:Can be an explosion hazard, especially when heated.
Fire Extinguishing Media:Use extinguishing media appropriate for surrounding fire.
Special Information:Firefighters should wear proper protective equipment and self-contained breathing apparatus with full facepiece operated in positive pressure mode.


6. Accidental Release Measures

Wear self-contained breathing apparatus and full protective clothing. With clean shovel, carefully place material into clean, dry container and cover; remove from area. Flush spill area with water.


7. Handling and Storage

Keep container tightly closed. Suitable for any general chemical storage area.


8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
-ACGIH (TWA) for Iodides:
0.01 ppm for inhalable fraction and vapor.
Ventilation System:A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):For conditions of use where exposure to the substance is apparent and engineering controls are not feasble, consult an industrial hygienist. For emergencies, or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.


9. Physical and Chemical Properties

Appearance: White
Odor: Characteristic odor.
Solubility: Negligible (< 0.1%)
Specific Gravity: 1.20
pH: No information found.

% Volatiles by volume @ 21C (70F): 0
Boiling Point: No information found.
Melting Point: 144C (291F)
Vapor Density (Air=1): Not applicable.
Vapor Pressure (mm Hg): Not applicable.
Evaporation Rate (BuAc=1): 0


10. Stability and Reactivity

Stability:Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products:Amines.
Hazardous Polymerization:Will not occur.
Incompatibilities:Strong oxidizing agents.
Conditions to Avoid:Heat, moisture.


11. Toxicological Information

 
  --------\Cancer Lists\------------------------------------------------------
                                         ---NTP Carcinogen---
  Ingredient                             Known    Anticipated    IARC Category
  ------------------------------------   -----    -----------    -------------
  Tetrabutylammonium Iodide               No          No            None
  (311-28-4)

12. Ecological Information

Environmental Fate:No information found.
Environmental Toxicity:No information found.


13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.


14. Transport Information

Not regulated.


15. Regulatory Information

 
  --------\Chemical Inventory Status - Part 1\---------------------------------
  Ingredient                                       TSCA  EC   Japan  Australia
  -----------------------------------------------  ----  ---  -----  ---------
  Tetrabutylammonium Iodide (311-28-4)              Yes  Yes   Yes      Yes                                      
 
  --------\Chemical Inventory Status - Part 2\---------------------------------
                                                          --Canada--
  Ingredient                                       Korea  DSL   NDSL  Phil.
  -----------------------------------------------  -----  ---   ----  -----
  Tetrabutylammonium Iodide (311-28-4)              Yes   Yes   No     Yes                 
 
  --------\Federal, State & International Regulations - Part 1\----------------
                                             -SARA 302-    ------SARA 313------
  Ingredient                                 RQ    TPQ     List  Chemical Catg.
  -----------------------------------------  ---   -----   ----  --------------
  Tetrabutylammonium Iodide (311-28-4)       No    No      No         No
 
  --------\Federal, State & International Regulations - Part 2\----------------
                                                        -RCRA-    -TSCA-
  Ingredient                                 CERCLA     261.33     8(d) 
  -----------------------------------------  ------     ------    ------
  Tetrabutylammonium Iodide (311-28-4)       No         No         No               
Chemical Weapons Convention:  No     TSCA 12(b):  No     CDTA:  No
SARA 311/312:  Acute: Yes      Chronic: Yes  Fire: No  Pressure: No
Reactivity: No          (Pure / Solid) 

Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
WHMIS:
This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR.


16. Other Information

Disclaimer: Nile Chemicals. provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose. NILE CHEMICALS. MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT TO WHICH THE INFORMATION REFERS. ACCORDINGLY, NILE CHEMICALS. WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE UPON THIS INFORMATION.

 

Product range

Ph Indicator Chemicals  Lab    Bulk       Catalyst Food Colour  Herbs Intermediates
Cesium Salts Ion Pair Reagents Direct Dyes Contact details Acid Dyes Solvents

PRODUCT LIST
nilesh@nilechemicals.comsales@nilechemicals.com